1·Open the main valve inlet pressure.
进口压力使主阀开启。
2·High inlet pressure can be caused by too high gas flow.
高气压力可能造成的过高的气体流量。
3·Comparison was made according to the different boundary inlet pressure.
对不同进口压力下，主要计算结果进行了对比。
4·For compressible fluids, where pressure drop exceeds half the inlet pressure.
对于可压缩性流体，如果压降超过进口压力的一半。
5·Regarding the inlet pressure, the absolute pressure or gauge pressure shall be indicated.
进口压力还要注明是绝对压力还是表压力。
6·A booster pump, used to increase the sterilization machine into this machine inlet pressure.
一台增压泵，用于增加杀菌机进入本机的进口压力。
7·Note: the outlet pressure is greater than the inlet pressure, the media will pass anti-wizard.
注：出口端压力大于进口端压力，介质会反向导通。
8·The control options include inlet pressure control, discharge pressure control and flow rate control.
控制方式包括进站压力控制、出站压力控制和流量控制。
9·Carrying pressing influences, about 80% that can reach the inlet pressure while carrying the pressing rate.
不受背压影响，背压率可以达到进口压力的80%左右。
10·Calculate the pressure difference by subtracting the desired outlet pressure from the maximum inlet pressure.
基本平衡单阀座最大限度减小进口压力变化对输出压力的影响。